Synergy manufactures and delivers Shuttle conveyors as per the requirement of their valued customers either based on their own design and engineering or of our design and engineering based on technical data received from client.
Shuttle conveyors are troughed belt conveyors mounted on trolleys with wheels which travel on rails. They receive feed from feed hoppers located above them and in turn feed bunkers placed below them and spaced at desired distances.
A Shuttle conveyor has the same components as a belt conveyor like idler sets, drive pulley, take-up cum tail pulley, belt; drive consisting of a gearbox, couplings and an electric motor, skirt board, scrapers and technological structures. It can be unidirectional or reversible.
In addition, a shuttle conveyor has its own long travel drive. Usually the axle of the wheel adjacent to the conveyor drive and the same adjacent to tail pulley is directly driven through a hollow shaft mounted geared motor or through a drive consisting of Electric Motor, Gearbox and Coupling. The power supply to the drive motors are accomplished by festooning cable arrangement since travel length in relatively small.